Spyderco Paramilitary Para 3 PM3 Custom GREEN Titanium Pin Standoff Lanyard Tube

Regular price $82.99

Tax included.

View color chart



Also available in other custom anodized colors.  Just contact me if interested.


FREE WORLDWIDE DELIVERY INCLUDED !!!


Up for sale is a 3 Piece Set..

1 x GREEN Anodized Titanium Lanyard Tube
1 x GREEN Anodized Titanium Standoff / Spacer
1 x GREEN Anodized Titanium Blade Stop Pin


Designed to fit Spyderco Para 3 (PM3) Series Knives.

(Won't fit the PARA 3 Light Weight Versions - C223PBK)

These custom parts are not designed to fit any Cloned or Fake Spyderco knives.
Do not buy these parts for any cloned or fake knives as they probably won't fit.
Might also not fit aftermarket scales if they are not the same dimensions as the factory scales.

The factory PM3 standard Blade Stop Pin, Standoff and Tube are not made from titanium. 

Upgrade them to Custom Titanium Versions Anodized in GREEN.

This Custom Titanium Part is a direct replacement for the Spyderco Para 3 (PM3) series knives.


Design Notes on the Custom Blade Stop Pin:

I have designed this Titanium Blade Stop Pin to sit flush against the G10 Scales.

The original Blade Stop Pin is rounded at the end. Making it more prone to scratching.

My version fits flush with the G10 scales just like the Torx screws and will look much better from the side view.


Design Notes on the Custom Sized Lanyard Hole (smaller):

I have designed this Titanium Lanyard Tube to have a smaller hole with a Ø 4.5mm / 3/16 inch diameter hole.

This makes the fitment of 550 Paracord a nicer tighter fit. Without it being overly loose like the original PM3 hole.

When installed it will also show more of the GREEN Titanium Lanyard Tube flange from the side view.

The smaller lanyard hole is designed to still fit normal (4mm) 7 Strand 550 Paracord. (as seen in the photos).

For reference the Original PM3 Steel Lanyard Hole is a Ø 6mm / 1/4 Inch Diameter Hole.


Anodizing Notes:

Green is the hardest color to anodize consistently, this color can vary from a Blue Green, to Mint Green to a Yellow Green color and possibly
other shades of colors mixed in. Let me know what tone of Green you are after and I will try my best to keep the color as consistent as possible.
(often re-doing it a few times, wasting parts or throwing away parts and starting again in the process)


Green is also very hard to capture on a photograph as it's true color may look different under different lighting conditions or on different angles.
or even on different screens when being viewed. To achieve this Green color additional processes, equipment and toxic chemicals have to be used.
The extra processes and extra safety procedures end up taking much longer than normal anodizing. Therefore reflecting in the higher price for this color.


Additional PM3 parts:


If wanting the Full Parts Set
(screw set / standoff / pin / lanyard tube) best to order all the PM3 parts at the same time so it will be in the same anodizing batch and match much better than if ordered at a later date.


Machining Notes:

Machining variations may also occur between batches. As I am always trying to improve my parts, so slight improvements or upgraded design elements may be added at different times along the way. This may not be reflected in the photos. However it will be added to the notes seen below.


* By placing an order for these PM3 parts you are accepting there could be a variation in color or machining to what is pictured.


INSTALLATION WARNING: (MUST READ)

I NEVER INTENDED TO DESIGN THE LANYARD TUBE. DUE TO THE FACT THAT IT'S VERY DIFFICULT TO REMOVE.
YOU CAN POSSIBLY DAMAGE
YOUR KNIFE IN THE PROCESS OF TAKING APART AND INSTALLING ONE OF THESE TUBES.
HOWEVER DUE TO THE MANY REQUESTS TO MAKE THEM.  HERE IT IS....

* SOME SPYDERCO KNIVES ARE ALSO USING PERMANENT RED LOCTITE ON THEIR SCREWS.

PLEASE WATCH THE MANY YOUTUBE VIDEOS AVAILABLE ON DISASSEMBLY & INSTALLATION FIRST.
YOU WILL HAVE TO FULLY DISASSEMBLE YOUR KNIFE TO INSTALL THIS 3 PIECE PARTS SET.

BY PURCHASING THIS ITEM YOU ARE FULLY AWARE THAT POSSIBLE IRREVERSIBLE DAMAGE
COULD OCCUR AS A RESULT OF TAKING
THE ORIGINAL STEEL LANYARD TUBE OUT.

YOU
ALONE WILL BE TAKING FULL RESPONSIBILITY
FOR ANY SUCH DAMAGE.
(THE SPYDERCO WARRANTY DOES NOT COVER THESE TYPES OF MODIFICATIONS)


IF YOU ARE NOT CONFIDENT IN TAKING APART AND POSSIBLY HAVING TO MODIFY
YOUR KNIFE TO FIT (IF ANYTHING GOES WRONG). IT IS BEST NOT TO BUY THIS ITEM.


Please note: No knives pictured are for sale.


What's included in this sale is only the following
3 parts to fit original Spyderco Para 3 (PM3) knife:


1 x GREEN Anodized Titanium Lanyard Tube

1 x GREEN Anodized Titanium Standoff / Spacer

1 x GREEN Anodized Titanium Blade Stop Pin


Other Notes:

Slight color and machining variations may also occur between batches. Custom colors can be requested.
Other colors such as: purple, yellow, maroon, raw titanium, light blue, brass, dark blue, bronze, gold etc.

Once you have received a colored titanium item. It may appear to have lost color once touched,
this is just the oil from your hands. If the oil been cleaned off the color will come back. See cleaning tip below.


Terms and Conditions for International Orders:

If your country's language is one other than English. You will need to confirm that you understand, NO KNIVES ARE FOR SALE.

International orders are sent via Airmail and usually take around 2 or 3 weeks to arrive to you once sent.
However orders can take  to longer to arrive depending on your country's air mailing delivery system.
Please do not buy if you cannot agree to this. All International items are sent via Airmail with tracking.


Sorry I have to keep repeating myself but there are many buyers especially from non English speaking countries that
assume the knife is also included. I am just trying to make my listing as clear as possible that NO KNIVES ARE INCLUDED.
Sorry no orders from Russia will be accepted. Orders from Italy must supply a phone number to add to the parcel and customs forms.



WORLDWIDE POSTAGE IS FREE !!!



I have many more matching GREEN Spyderco Para 3 (PM3) titanium parts available.
Such as more Full Screw Set, Pocket Clip Hole Protector Screws, Pin, Lanyard Tubes, Standoffs etc.
Please check my other listings or contact me for more options.


(This set is also available in other colors: Brass/Bronze/Purple/Blue/Raw/Maroon etc. Please contact me if interested).


Anodized Titanium Cleaning Tip:

To maintain the look of your new titanium parts.

Wipe clean with some Acetone but at the same time

be careful NOT to get Acetone on the G10 or Carbon knife scales.

Windex also works too but Acetone is stronger.



PLEASE NOTE: These custom parts may need up to 1 week lead time to process after ordering.