Also available in other custom anodized colors. Just contact me if interested.
FREE WORLDWIDE SHIPPING IS INCLUDED!!!
Up for sale is the FULL 21 Piece Set of...
Custom MAGENTA Anodized Titanium Parts
to fit Benchmade MINI BUGOUT 533 Series Knives.
This Custom Titanium 21 Piece Parts Set is a direct replacement for all the
Benchmade MINI BUGOUT 533 Series knives.
These custom parts are not designed to fit Cloned or Fake Benchmade Knives.
Do not buy these parts for any cloned or fake knives as they probably won't fit.
(this set might not fit customized scales unless the scales have been designed to be the same size as the original scales)
Upgrade the Original Black Steel Parts to Lighter Custom Rust Proof MAGENTA Anodized Titanium Versions.
What is included in this sale is only the 21 piece set of Titanium Parts designed to fit the original
Benchmade 533 Series knives. Consisting of 21 x MAGENTA Anodized Parts in total.
Please note: No knives pictured or mentioned are for sale.
This 21 pc set includes the following titanium parts:
1 x Custom MAGENTA Anodized Titanium Pivot Nut
1 x T10 Torx MAGENTA Anodized Titanium Pivot Screw
6 x T6 Torx MAGENTA Anodized Titanium Standoff and Pin Screws (shortest size)
2 x T6 Torx MAGENTA Anodized Titanium Scale Screws (shortest size)
2 x T6 Torx MAGENTA Anodized Titanium Pocket Clip Screws + 1 extra for clips with 3 holes (longest size)
3 x T6 Torx MAGENTA Anodized Titanium Pocket Clip Hole Protector Screws (middle size)
2 x Custom MAGENTA Anodized Titanium Custom T6 Thumb Studs (1 set)
1 x Custom MAGENTA Anodized Titanium Blade Stop Pin
2 x Custom MAGENTA Anodized Titanium Standoffs / Spacers
1 x Custom MAGENTA Anodized Titanium Axis Lock Bar
Anodizing Notes:
Magenta is one of the hardest color to anodize, this color can vary on single parts to full sets.
I have almost perfected it and I will try my best to keep the color as consistent as possible
within any set purchased as many things affect it. Like ambient temperature, age of chemical mix,
length of time anodizing, voltage, pre-cleaning procedure, voltage contact etc.
(I am often re-doing it a few times to get it right, or wasting parts or throwing away parts in the
process, it can easily take around 2 hours per set to get right) Magenta is also very hard to capture
on a photograph as it's true color may look different under different lighting conditions or on different
angles or even on different screens when being viewed.Please take this a general color range only.
As in real life it looks brighter due to titanium's metallic surface reflecting through the color
This color is also NOT guaranteed to match any stock Benchmade aluminum scales or standoffs.
Additional Titanium MINI BUGOUT parts: If wanting the Full Parts Set (screw set / standoffs / pivot set /
axis lock bar / thumb stud set) it is best to order ALL the BUGOUT parts at the same time. So it will be
in the same anodizing batch and match much better than if ordered at a later date.
* By placing an order for these MAGENTA parts you are accepting there could be a variation in color to what is pictured.
Please note: I am consistently improving each batch of part sets as time goes on.
There might be slight color changes and machining improvements to what is pictured.
Slight color and machining updates or variations may also occur between batches.
Custom colors can be requested. Other colors such as purple, yellow, maroon, copper, natural raw titanium,
light blue, brass, dark blue, bronze, gold etc.
To install this 21pc Set, good quality Torx T6 and T10 tools will be needed. (Such as Wiha Torx tools)
Please note: A bit of non-permanent thread locking glue, plumbers tape or even a drop of nail polish is highly
recommended on the screw's thread. Just incase it rattles off over time, as an extra safety precaution.
INSTALLATION WARNING:
BE PREPARED TO TAKE YOUR WHOLE KNIFE APART IN ORDER TO INSTALL THESE PARTS.
THE AXIS LOCKING SYSTEM IS QUITE FIDDLY TO TAKE APART AND RE-INSTALL.
THERE ARE 2 WIRE SPRINGS HOLDING IT ALL TOGETHER. SO BE CAREFUL NOT TO LOSE
THESE SPRINGS AS THEY ARE VITAL FOR A FUNCTIONING AXIS LOCK.
THERE WILL ALSO BE A SLIGHT COMPROMISE IN BLADE OPENING SMOOTHNESS FROM THE
TITANIUM PART RUBBING ON THE BLADE TANG AREA. POSSIBLY LUBE OR POLISHING THE
TANG CAN HELP. THE AXIS LOCK BAR COMES ALREADY POLISHED TO A SMOOTH SURFACE.
BY PURCHASING THIS SET YOU ARE AWARE OF THE ABOVE MENTIONED AND THAT DAMAGE
OR THE POTENTIAL FOR MISSING PARTS COULD OCCUR AS A RESULT OF TAKING THE KNIFE.
YOU ALONE WILL BE TAKING FULL RESPONSIBLY FOR ANY SUCH DAMAGE OR LOSS.
(THE BENCHMADE WARRANTY MIGHT NOT COVER THESE TYPES OF MODS)
IF YOU ARE NOT CONFIDENT IN TAKING APART AND PUTTING YOUR KNIFE BACK TOGETHER
(OR IF ANYTHING ELSE GOES WRONG), IT IS BEST NOT TO BUY THIS SET.
Once you have received a colored titanium product. It may appear to have lost color once touched,
this is only just the oil from your hands. If the oil has been cleaned off the color will come back.
Use acetone or nail polish remover to clean the oil off the anodized screws.
The custom anodizing will look new again!
Please Note:
Only 21 MAGENTA Anodized Titanium Parts are for sale in this listing.
No knives are included in this sale.
If you are an international buyer, I may request your phone number and confirmation that
you understand only the parts are for sale. No knives pictured are for sale.
Please contact me if you have any questions or offers.
Offers may be accepted if the right conditions and price is reached.
Custom colors can be requested:
Other colors such as purple, bronze, natural raw titanium, brass, yellow, light green, light blue, dark blue, gold etc.
Terms and Conditions for International Orders:
If you are in international buyer.
I may contact you before sending to confirm that only the screws are for sale.
If no reply has been made within 1 week, the sale will be canceled.
I will also cancel the order if the delivery address is unreadable or incomplete.
If your country's main language is one other than English.
You will need to confirm that you understand, NO KNIVES ARE FOR SALE.
International orders are sent via Airmail and usually take around 2-3 weeks to arrive to you once sent.
However orders can take longer to arrive depending on your country's air mailing delivery system.
Please do not buy if you cannot agree to this. All International items are sent via Airmail.
Sorry I have to keep repeating myself but there are many buyers especially from Non-English
speaking countries that assume the knife is also included.
I am just trying to make my listings as clear as possible that NO KNIVES ARE INCLUDED.
Sorry NO orders from Russia or surrounding countries will be accepted.
I just cannot read or write the language to be able to send out to you.
Orders from Italy must supply a phone number to add to the parcel and customs forms.
WORLDWIDE SHIPPING IS FREE !!!
I have other Colored Anodized Benchmade MINI BUGOUT titanium parts available.
Please check my other listings for more options or contact me directly if you don't see it.
(This set is also available in many other colors: Brass / Bronze / Blue / Purple / Natural etc.
Please contact me if interested).
Anodized Titanium Cleaning Tip:
To maintain the look of your new titanium parts.
Gently wipe clean with some Acetone but at the same time
be careful NOT to get Acetone on any Carbon or G10 knife scales.
Windex (safer) also works too but Acetone is stronger.