Benchmade 945BK-1 Mini Osborne BRASS Anodized FULL 22 Piece Titanium Parts Set

Regular price $212.99

Tax included.

View color chart

Also available in other custom anodized colors.  Just contact me if interested.

FREE WORLDWIDE SHIPPING IS INCLUDED!!!


Up for sale is the FULL 22 piece set of...

Custom BRASS Anodized Titanium parts set to fit the
Benchmade Mini Osborne 945BK-1 Series Knives.

(This set is for the 945BK-1 MINI OSBORNE, Not the larger 940, 943, 940-1 or 940-2 knives)


The 945BK-1 Black factory standard torx screws are not titanium.

The Black factory screws also do not fit properly as they are too long and stick out past the scales into the blade area.

My custom designed Titanium screws fit perfectly and do not protrude past the scales into the blade area.

Upgrade the standard torx screws to a 22 Piece set of 
ANODIZED BRASS Rust Proof Titanium Torx Screws.

Not only do they look great but they are also lighter and fit better than the black factory torx screws.

These Custom Titanium Parts are a direct replacement for the Benchmade 945BK-1 Knife.


Please note:
 No knives pictured or mentioned are for sale.


What is included in this sale is only the 22 piece set of Titanium Parts to fit the 
original Benchmade 945BK-1 knife. Consisting of 22 x BRASS Anodized parts in total. 


This 22pc set includes the following titanium parts:

1 x Custom  BRASS Anodized Titanium Pivot Nut
1 x T10 Torx BRASS Anodized  Titanium Pivot Screw
4 x T6   Torx
 BRASS Anodized  Titanium Standoff Screws
4 x T6   Torx
 BRASS Anodized  Titanium Scale Screws
3 x T6   Torx 
BRASS Anodized  Titanium Pocket Clip Screws
3 x T6   Torx 
BRASS Anodized  Titanium Pocket Clip Hole Protector Screws
2 x Custom   
BRASS Anodized  Titanium Custom T6 Thumb Studs (= 1 set)
1 x Custom   
BRASS Anodized  Titanium Blade Stop Pin
2 x Custom   
BRASS Anodized  Titanium Standoffs
1 x Custom  
 BRASS Anodized  Titanium Axis Lock Bar


To install these Titanium Torx screws set, good quality Torx tools will be needed. (Such as Wiha Torx tools)

Please note: A bit of thread locking glue, plumbers tape or even a drop of nail polish is highly recommended on 
the screw's thread. Just incase it rattles off over time, as an extra safety precaution.


INSTALLATION WARNING:

BE PREPARED TO TAKE YOUR WHOLE KNIFE APART IN ORDER TO INSTALL THESE PARTS.

THE AXIS LOCKING SYSTEM IS QUITE FIDDLY TO TAKE APART AND RE-INSTALL.

THERE ARE 2 WIRE SPRINGS HOLDING IT ALL TOGETHER. SO BE CAREFUL NOT TO LOSE

THESE SPRINGS AS THEY ARE VITAL FOR A FUNCTIONING AXIS LOCK.

THERE WILL ALSO BE A SLIGHT COMPROMISE IN BLADE OPENING SMOOTHNESS FROM THE

TITANIUM PART RUBBING ON THE BLADE TANG AREA. POSSIBLY LUBE OR POLISHING THE

TANG CAN HELP. THE AXIS LOCK BAR COMES ALREADY POLISHED TO A SMOOTH SURFACE.

BY PURCHASING THIS SET YOU ARE AWARE OF THE ABOVE MENTIONED AND THAT DAMAGE

OR THE POTENTIAL FOR MISSING PARTS COULD OCCUR AS A RESULT OF TAKING THE KNIFE.

YOU ALONE WILL BE TAKING FULL RESPONSIBLY FOR ANY SUCH DAMAGE OR LOSS.

(THE BENCHMADE WARRANTY MIGHT NOT COVER THESE TYPES OF MODS)

IF YOU ARE NOT CONFIDENT IN TAKING APART AND PUTTING YOUR KNIFE BACK TOGETHER

(OR IF ANYTHING ELSE GOES WRONG),  IT IS BEST NOT TO BUY THIS SET.


Once you have received a colored titanium product. It may appear to have lost color once touched,
this is only just the oil from your hands. If the oil has been cleaned off the color will come back.
Use acetone or nail polish remover to clean the oil off the anodized screws.
The custom anodizing will look new again!



Please Note:
Only 22 Replacement BRASS Anodized Titanium Parts are for sale in this listing.
No knives and No pocket clips are included in this sale.

If you are an international buyer, I may request your phone number and confirmation that
you understand only the parts are only for sale. No knives pictured are for sale.


Please contact me if you have any questions or offers.
Offers may be accepted if the right conditions and price is reached.

Custom colors can be requested: Other colors such as 
purplebronzenatural raw titaniumbrassyellowlight greenlight bluedark bluegold etc.


Terms and Conditions for International Orders:

If you are in international buyer.
I may contact you before sending to confirm that only the screws are for sale.
If no reply has been made within 1 week, the sale will be canceled.
I will also cancel the order if the delivery address is unreadable or incomplete.

If your country's main language is one other than English.
You will need to confirm that you understand, NO KNIVES ARE FOR SALE.

International orders are sent via Airmail and usually take around 3-4 weeks to arrive to you.
However orders can take longer to arrive depending on your country's air mailing delivery system.
Please do not buy if you cannot agree to this. All International items are sent via Airmail.


Sorry I have to keep repeating myself but there are many buyers especially from Non-English
speaking countries that assume the knife is also included.
I am just trying to make my listings as clear as possible that 
NO KNIVES ARE INCLUDED.

Sorry NO orders from Russia or surrounding countries will be accepted.
I just cannot read or write the language to be able to send out to you.
Orders from Italy must supply a phone number to add to the parcel and customs forms.


WORLDWIDE SHIPPING IS FREE !!!


I have other Benchmade 945BK-1 titanium parts available.

Please check my other listings or contact me for more options.

(This set is also available in other colors: 
Brass Bronze Blue Purple Natural etc. Please contact me if interested).




Anodized Titanium Cleaning Tip:

To maintain the look of your new titanium parts.

Gently wipe clean with some Acetone but at the same time

be careful NOT to get Acetone on any Carbon or G10 knife scales.

Windex (safer) also works too but Acetone is stronger.