Also available in other custom anodized colors. Just contact me if interested.
FREE WORLDWIDE SHIPPING IS INCLUDED!!!
Up for sale is a 20 piece set of...
Custom GREEN Anodized Titanium Parts
to fit Benchmade MINI BUGOUT 533 Series Knives.
(this set might not fit customized scales unless the scales have been designed to be the same size as the original scales)
Upgrade the Original Black Steel Parts to Lighter Custom Rust Proof GREEN Anodized Titanium Versions.
This Custom Titanium 20 Piece Parts Set is a direct replacement for all the Benchmade MINI BUGOUT 533 Series knives.
Please note: No knives pictured or mentioned are for sale.
What is included in this sale is only the 20 piece set of Titanium Screws to fit the original
Benchmade 533 Series knives. Consisting of 20 x GREEN Anodized Parts in total.
This 20pc set includes the following titanium parts:
1 x Custom GREEN Anodized Titanium Pivot Nut
1 x T10 Torx GREEN Anodized Titanium Pivot Screw
6 x T6 Torx GREEN Anodized Titanium Standoff and Pin Screws (shortest size)
2 x T6 Torx GREEN Anodized Titanium Scale Screws (shortest size)
2 x T6 Torx GREEN Anodized Titanium Pocket Clip Screws (longest size)
3 x T6 Torx GREEN Anodized Titanium Pocket Clip Hole Protector Screws (middle size)
2 x Custom GREEN Anodized Titanium Custom T6 Thumb Studs ( 1 set)
1 x Custom GREEN Anodized Titanium Blade Stop Pin (designed for a tight fit)
2 x Custom GREEN Anodized Titanium Standoffs (designed for a tight fit)
Green is the hardest color to anodize, this color can vary on single parts to full sets from a Blue Green to a Yellow Green color.
I have almost perfected it and I will try my best to keep the color as consistent as possible within any set purchased as many things affect it.
Like ambient temperature, age of chemical mix, length of time anodizing, voltage, pre-cleaning procedure, voltage contact etc.
(I am often re-doing it a few times to get it right, or wasting parts or throwing away parts in the process, it can easily take around 2 hours per set to get right)
Green is also very hard to capture on a photograph as it's true color may look different under different lighting conditions or on different angles.
or even on different screens when being viewed. The green anodizing color is around the Pantone 339 Green color.
Please take this a general color range only. As in real life it looks brighter due to titanium's metallic surface reflecting through the color
This color is also NOT guaranteed to match any stock Benchmade aluminum scales or standoffs.
Additional Titanium MINI BUGOUT parts: If wanting the Full Parts Set (screw set / standoffs / pivot set / axis lock bar / thumb stud set) it is best to order
ALL the MINI BUGOUT parts at the same time. So it will be in the same anodizing batch and match much better than if ordered at a later date.
* By placing an order for this GREEN part you are accepting there could be a variation in color to what is pictured.
Slight color and machining updates or variations may also occur between batches. Custom colors can be requested.
Other colors such as purple, yellow, maroon, copper, natural raw titanium, light blue, brass, dark blue, bronze, gold etc.
To install this 20pc Set, good quality Torx T6 and T10 tools will be needed. (Such as Wiha Torx tools)
Please note: A bit of non-permanent thread locking glue, plumbers tape or even a drop of nail polish is highly recommended on
the screw's thread. Just incase it rattles off over time, as an extra safety precaution.
BE PREPARED TO TAKE YOUR WHOLE KNIFE APART IN ORDER TO INSTALL THESE PARTS.
DUE TO THE SCALES BEING PLASTIC. I HAVE DESIGNED THE STANDOFFS FOR A TIGHTER FIT.
THIS WILL HELP REDUCE THE CHANCE OF THEM SPINNING WHILST BEING TIGHTENED.
SO THERE IS NOW A NEED TO PUSH THE STANDOFFS IN PLACE DUE TO THE TIGHTER DESIGN.
BY PURCHASING THIS ITEM YOU ARE ALSO AWARE THAT DAMAGE OR THE POTENTIAL FOR
MISSING PARTS COULD OCCUR AS A RESULT OF TAKING APART THE AXIS LOCK MECHANISM.
YOU ALONE WILL BE TAKING FULL RESPONSIBLY FOR ANY SUCH DAMAGE OR LOSS.
(THE BENCHMADE WARRANTY MIGHT NOT COVER THESE TYPES OF MODIFICATIONS)
IF YOU ARE NOT CONFIDENT IN TAKING APART AND PUTTING YOUR KNIFE BACK TOGETHER
(OR IF ANYTHING ELSE GOES WRONG), IT IS BEST NOT TO BUY THIS ITEM.
Once you have received a colored titanium product. It may appear to have lost color once touched,
this is only just the oil from your hands. If the oil has been cleaned off the color will come back.
Use acetone or nail polish remover to clean the oil off the anodized screws.
The custom anodizing will look new again!
Only 20 GREEN Anodized Titanium Parts are for sale in this listing.
No knives are included in this sale.
If you are an international buyer, I may request your phone number and confirmation that
you understand only the screws are only for sale. No knives pictured are for sale.
Please contact me if you have any questions or offers.
Offers may be accepted if the right conditions and price is reached.
Custom colors can be requested:
Other colors such as purple, bronze, natural raw titanium, brass, yellow, light green, light blue, dark blue, gold etc.
Terms and Conditions for International Orders:
If you are in international buyer.
I may contact you before sending to confirm that only the screws are for sale.
If no reply has been made within 1 week, the sale will be canceled.
I will also cancel the order if the delivery address is unreadable or incomplete.
If your country's main language is one other than English.
You will need to confirm that you understand, NO KNIVES ARE FOR SALE.
International orders are sent via Airmail and usually take around 2-3 weeks to arrive to you once sent.
However orders can take longer to arrive depending on your country's air mailing delivery system.
Please do not buy if you cannot agree to this. All International items are sent via Airmail.
Sorry I have to keep repeating myself but there are many buyers especially from Non-English
speaking countries that assume the knife is also included.
I am just trying to make my listings as clear as possible that NO KNIVES ARE INCLUDED.
Sorry NO orders from Russia or surrounding countries will be accepted.
I just cannot read or write the language to be able to send out to you.
Orders from Italy must supply a phone number to add to the parcel and customs forms.
WORLDWIDE SHIPPING IS FREE !!!
I have other GREEN Anodized Benchmade MINI BUGOUT titanium parts available.
Such as: My Titanium Standoff Set, Titanium Axis Lock Bar, Titanium Thumb Studs etc.
Please check my other listings for more options or contact me directly if you don't see it.
(This set is also available in other colors: Brass / Bronze / Blue / Purple / Natural etc. Please contact me if interested).
Anodized Titanium Cleaning Tip:
To maintain the look of your new titanium parts.
Gently wipe clean with some Acetone but at the same time
be careful NOT to get Acetone on any Carbon or G10 knife scales.
Windex (safer) also works too but Acetone is stronger.