Benchmade 940-2 Osborne 16 PC Custom Titanium Screw & Pivot Set Anodized GREEN

Regular price $67.00

Tax included.

View color chart

Also available in other custom anodized colors.  Just contact me if interested.


Many people have requested a GREEN anodized color.
Here is my GREEN set!

Up for sale is a Brand New 16 piece set of...

Custom Titanium Pivot and Screw Set Anodized in GREEN
to fit the Benchmade Carbon Fiber Osborne 940-1 & 940-2 Knife.

This set won't fit the aluminum scaled non-standoff 940 version. Contact me if you want this color on the 940 set.

The Black factory standard torx screws are not titanium.

The Black factory screws also do not fit properly as they are too long and stick out past the scales into the blade area.

My custom designed GREEN Anodized Titanium screws fit perfectly and do not protrude past the scales into the blade area.

Upgrade the standard torx screws to an 16 Piece set of ANODIZED GREEN Rust Proof Titanium Torx Screws.

Not only do they look great but they are also lighter and fit better than the black factory torx screws.

These Custom Titanium Torx screws are a direct replacement for the
Benchmade 940-1 Knife.

It will NOT fit the Benchmade 940 or 943 (non standoff version). Please contact me for the 940 version to discuss a custom set.

Please note: No knives pictured or mentioned are for sale.

What is included in this sale is only the 16 piece set of Titanium Screws to fit the original
Benchmade 940-1 & 940-2 knife.
Consisting of 16 x GREEN Anodized Parts in total. 

This 16pc set includes the following titanium screws:

1 x Custom   GREEN Anodized Titanium Pivot Nut
1 x T10 Torx GREEN Anodized Titanium Pivot Screw
4 x T6   Torx GREEN
Anodized Titanium Body Scale Screws (shortest size)
4 x T6   Torx GREEN Anodized Titanium Standoff Screws
3 x T6   Torx GREEN Anodized Titanium Pocket Clip Screws (longest size)
3 x
T6   Torx GREEN Anodized Titanium Pocket Clip Hole Protector Screws

Anodizing Notes:

Green is the hardest color to anodize, this color can vary on single parts to full sets from a Blue Green to a Yellow Green color.
I have almost perfected it and I will try my best to keep the color as consistent as possible within any set purchased as many things affect it.
Like ambient temperature, age of chemical mix, length of time anodizing, voltage, pre-cleaning procedure, voltage contact etc.
(I am often re-doing it a few times to get it right, or wasting parts or throwing away parts in the process, it can easily take around 2 hours per set to get right)
Green is also very hard to capture on a photograph as it's true color may look different under different lighting conditions or on different angles.
or even on different screens when being viewed. The green anodizing color is around the Pantone 339 Green color.
Please take this a general color range only. As in real life it looks brighter due to titanium's metallic surface reflecting through the color
This color is also NOT guaranteed to match any stock Benchmade aluminum scales or standoffs.
Additional Titanium 940-1 parts:
If wanting the Full Parts Set
(screw set / standoffs / pivot set / axis lock bar / thumb stud set) it is best to order
ALL the 940-1 parts at the same time. So it will be in the same anodizing batch and match much better than if ordered at a later date.

* By placing an order for this GREEN part you are accepting there could be a variation in color to what is pictured.

To install these Titanium Torx screws set, good quality Torx tools will be needed. (Such as Wiha Torx tools)

Please note: A bit of non-permanent thread locking glue, plumbers tape or even a drop of nail polish is highly recommended on
the screw's thread. Just
incase it rattles off over time, as an extra safety precaution.

Once you have received a colored titanium product. It may appear to have lost color once touched,
this is only just the oil from your hands. If the oil has been cleaned off the color will come back.
Use acetone or nail polish remover to clean the oil off the anodized screws.
The custom anodizing will look new again!

Please Note:
Only 16 Replacement GREEN Anodized Titanium Screws are for sale in this listing.
No knives and No pocket clips are included in this sale.

If you are an international buyer, I may request your phone number and confirmation that
you understand only the screws are only for sale. No knives pictured are for sale.

Please contact me if you have any questions or offers.
Offers may be accepted if the right conditions and price is reached.

Custom colors can be requested:
Other colors such as purple, bronze, natural raw titanium, brass, yellow, light green, light blue, dark blue, gold etc.

Terms and Conditions for International Orders:

If you are in international buyer.
I may contact you before sending to confirm that only the screws are for sale.
If no reply has been made within 1 week, the sale will be canceled.
I will also cancel the order if the delivery address is unreadable or incomplete.

If your country's main language is one other than English.
You will need to confirm that you understand, NO KNIVES ARE FOR SALE.

International orders are sent via Airmail and usually take around 2-3 weeks to arrive to you.
However orders can take longer to arrive depending on your country's air mailing delivery system.
Please do not buy if you cannot agree to this. All International items are sent via Airmail.

Sorry I have to keep repeating myself but there are many buyers especially from Non-English
speaking countries that assume the knife is also included.
I am just trying to make my listings as clear as possible that NO KNIVES ARE INCLUDED.

Sorry NO orders from Russia or surrounding countries will be accepted.
I just cannot read or write the language to be able to send out to you.
Orders from Italy must supply a phone number to add to the parcel and customs forms.


I have other GREEN Anodized Benchmade 940-1 & 940-2 titanium parts available.
Such as: My Titanium Standoff Set, Titanium Axis Lock Bar, Titanium Thumb Studs etc.
Please check my other listings for more options or contact me directly if you don't see it.

(This set is also available in other colors: Brass / Bronze / Blue / Purple / Natural etc. Please contact me if interested).

Anodized Titanium Cleaning Tip:

To maintain the look of your new titanium parts.

Gently wipe clean with some Acetone but at the same time

be careful NOT to get Acetone on any Carbon or G10 knife scales.

Windex (safer) also works too but Acetone is stronger.

PLEASE NOTE: These custom parts may need up to 2 weeks lead time to process after ordering.