Also available in other custom anodized colors. Just contact me if interested.
FREE WORLDWIDE DELIVERY INCLUDED !!!
Up for sale is a ...
Custom GREEN Anodized Titanium Lanyard Tube
to fit Spyderco Paramilitary 2 (PM2) Knives.
The factory standard lanyard tube is not titanium.
Upgrade the standard steel Lanyard Tube to a Custom Titanium Lanyard Tube anodized in GREEN.
This Custom Titanium Lanyard Tube is a direct replacement for the Spyderco PM2 series knives.
These custom part is not designed to fit Cloned or Fake Spyderco knives.
Do not buy this part for any cloned or fake knives as they probably won't fit.
Might also not fit aftermarket scales if they are not the same dimensions as the factory scales.
Green is the hardest color to anodize consistently, this color can vary from a Blue Green, to Mint Green to a Yellow Green color and possibly
other shades of colors mixed in. Let me know what tone of Green you are after and I will try my best to keep the color as consistent as possible.
(often re-doing it a few times, wasting parts or throwing away parts and starting again in the process)
Green is also very hard to capture on a photograph as it's true color may look different under different lighting conditions or on different angles.
or even on different screens when being viewed. To achieve this Green color additional processes, equipment and toxic chemicals have to be used.
The extra processes and extra safety procedures end up taking much longer than normal anodizing. Therefore reflecting in the higher price for this color.
Additional PM2 parts:
If wanting the Full Parts Set (screw set / standoff / pin / lanyard tube) best to order all the PM2 parts at the same time so it will be in the same anodizing batch and match much better than if ordered at a later date.
variations may also occur between batches. As I am always trying to
improve my parts, so slight improvements or upgraded design elements may
be added at different times along the way. This may not be reflected in
the photos. However it will be added to the notes seen below.
* By placing an order for this PM2 part you are accepting there could be a variation in color or machining to what is pictured.
IN 2018 THE TUBE DESIGN HAS BEEN UPDATED.
AS SEEN IN THE FIRST PHOTO. I CALL IT MY (GEN 2) VERSION.
AFTER THE FIRST PHOTO, THE OLDER BLUE DESIGN IS PICTURED. (GEN 1)
YOU WILL RECEIVE THE UPDATED NEW GREEN (GEN 2) DESIGN.
Custom Sized Lanyard Hole (smaller):
I have designed this Titanium Lanyard Tube to have a smaller hole with a Ø 4.5mm / 3/16 inch diameter hole.
This makes the fitment of 550 Paracord a nicer tighter fit. Without it being overly loose like the original PM2 hole.
When installed it will also show more of the Green Titanium Lanyard Tube flange from the side view.
The smaller lanyard hole is designed to still fit normal (4mm) 7 Strand 550 Paracord.
(see my Blue PM2 Lanyard Tube ebay listing for many more photos of this feature).
For reference the Original PM2 Steel Lanyard Hole is a Ø 6mm / 1/4 Inch Diameter Hole.
INSTALLATION WARNING: (MUST READ)
I NEVER INTENDED TO DESIGN THIS ITEM. DUE TO THE FACT THAT YOU CAN POSSIBLY DAMAGE
YOUR KNIFE IN THE PROCESS OF TAKING APART AND INSTALLING ONE OF THESE LANYARD TUBES.
HOWEVER DUE TO THE MANY REQUESTS TO MAKE SOME. HERE IT IS....
PLEASE WATCH THE MANY YOUTUBE VIDEOS AVAILABLE ON DISASSEMBLY & INSTALLATION FIRST.
YOU WILL HAVE TO FULLY DISASSEMBLE YOUR KNIFE TO INSTALL THIS LANYARD TUBE.
THE ORIGINAL PM2 LANYARD TUBE IS PRESSED AND FLARED IN PLACE AND CAN BE VERY DIFFICULT TO REMOVE.
BY PURCHASING THIS ITEM YOU ARE FULLY AWARE THAT POSSIBLE IRREVERSIBLE DAMAGE
COULD OCCUR AS A RESULT OF TAKING THE ORIGINAL TUBE OUT.
YOU ALONE WILL BE TAKING FULL RESPONSIBLY FOR ANY SUCH DAMAGE.
(THE SPYDERCO WARRANTY DOES NOT COVER THESE TYPES OF MODIFICATIONS)
IF YOU ARE NOT CONFIDENT IN TAKING APART AND POSSIBLY HAVING TO MODIFY
YOUR KNIFE TO FIT (IF ANYTHING GOES WRONG). IT IS BEST NOT TO BUY THIS ITEM.
Please note: No knives pictured are for sale.
What is included in this sale is only 1 x GREEN Titanium Lanyard Tube to fit the original Spyderco PM2 knife.
Other colors such as: purple, yellow, maroon, raw titanium, light blue, brass, dark blue, bronze, gold etc.
Once you have received a colored titanium item. It may appear to have lost color once touched,
this is just the oil from your hands. If the oil been cleaned off the color will come back. See cleaning tip below.
Terms and Conditions for International Orders:
If your country's language is one other than English. You will need to confirm that you understand, NO KNIVES ARE FOR SALE.
International orders are sent via Airmail and usually take around 2 or 3 weeks to arrive to you.
However orders can take to longer to arrive depending on your country's air mailing delivery system.
Please do not buy if you cannot agree to this. All International items are sent via Airmail with tracking.
Sorry I have to keep repeating myself but there are many buyers especially from non English speaking countries that
assume the knife is also included. I am just trying to make my listing as clear as possible that NO KNIVES ARE INCLUDED.
Sorry no orders from Russia will be accepted. Orders from Italy must supply a phone number to add to the parcel and customs forms.
WORLDWIDE POSTAGE IS FREE !!!
I have many more matching GREEN Spyderco PM2 titanium parts available.
Such as more Full Screw Set, Pocket Clip Hole Protector Screws, Lanyard Tubes, Standoffs etc.
Please check my other listings or contact me for more options.
(This set is also available in other colors: Brass/Bronze/Purple/Blue/Raw etc. Please contact me if interested).
Anodized Titanium Cleaning Tip:
To maintain the look of your new titanium parts.
Wipe clean with some Acetone but at the same time
be careful NOT to get Acetone on the G10 or Carbon knife scales.
(Windex can also be used too)
PLEASE NOTE: These custom parts may need up to 1 or 2 weeks lead time to process after ordering.